Interior Sets

Entry Handlesets


Entry Sets

Cabinet Hardware



General Questions

All products are assembled in Denver, CO and will be built for your order by our experienced, long-term personnel. Once we receive your order, normal order turn-around time is 3-5 days. Our fill-rate averages over 99%!

We ship to all locations within the United States. Shipping times depend on your location. If you live down the street from us in Colorado, you'll get it faster than if you live in Alaska. Receive free shipping via via FedEx Home Delivery® or FedEx Ground Delivery® in the U.S. on orders over $200.  Expedited shipping option are available during checkout.

Shipping charges are calculated after all discount offers and promos have been added and before tax is applied. If you did not receive free shipping on your order, it may have been because your total before tax or after your coupon was applied was below the minimum amount needed to receive free shipping.

If you need to modify your order, please contact us directly within an hour of placing it. We'll do our best to help with your order, but if it has been shipped out already, it can not be modified.

If for any reason you are not completely satisfied with your purchase, you may return your item(s) within 30 days of delivery. All returns require a proof
of purchase and must be returned in new, unused, and unaltered condition.  If you purchased an Ageless Iron product from a third-party retailer, returns must be initiated through that retailer.

No returns after 30 days are permitted.

For more information, please contact us directly via the form on our CONTACT US page using the topic "Returns/Exchanges/Warranty".

If you see an item on sale, don't wait around to purchase it. Sale prices are not permanent and special promotions often end within a few days.

If we mark down the price of an item you've already purchased, let us know and we will gladly adjust the sale price at your request within 14 days of your shipment date. Price adjustments will be credited back to the original form of payment used to purchase the item. Price adjustments are only valid for items purchased at

We do not price match products sold through 3rd Party retailers or websites like Ebay,, Amazon, Wayfair, Home Depot,, House of Antique Hardware, Houzz and

Yes. All orders totaling $200 or more will be shipped via FedEx Home Delivery® or FedEx Ground Delivery® at no charge. On orders totaling under $200, the customer will assume responsibility for shipping charges. Free shipping is only applied to orders that total over $200 before tax. Orders that total below $200 after coupon/discounts are applied will not be eligible for free shipping.

We offer a 5-Year Mechanical and 5-Year Finish Warranty. Refer to the Warranty Section of this site for more information.

Yes, we do offer a Trade Program. Please contact our customer service team at

Product Questions

Each Ageless Iron lockset weighs between 3.5 and 5 pounds. Every piece is made from solid, cast iron.

A passage function (tubular latch) is used on a closet or hallway door and does not lock. A privacy (tubular latch) is a good door set to use on a bedroom, bathroom, or any other interior door you want to lock. A dummy knob does not turn and does not function as a working lock. A dummy function is typically used on doors with some other device that holds the door closed. Dummy knobs are surface mounted to your door.

Yes! Just two screws hold the lock onto the door. All you need is a standard Phillips screwdriver. For additional installation support including downloadable instructions and how-to videos please view our Installation Help section.

No. Standard door preparation with a 2 1/8” cross-bore is sufficient. To ensure a proper fit you should measure your backset to see if it’s 2 3/8” or 2 3/4″.

Yes, if standard door preparation has been done. Please note that the latch faces and strikes come with wood mounting screws.  For steel or iron doors, you will need to purchase machine screws from a hardware store. Simply determine the threads on your door and/or jamb, and take the included wood screws with you to the hardware store.  Ask for machine screws in the same size.  Add a little satin black paint, and voilà!

Both. Ageless Iron has square corner latch faces standard. If you need radius corners, just specify in the "Notes" section them when ordering.

Closet Doors

For closets where the handles on the double doors do not need to latch, two single dummy sets may be installed on the exterior side of these doors. Note: bore holes are not required for dummy sets.

Interior French Doors

For interior French/double doors that need to latch, install a double dummy set on one side and a passage set on the other. If the doors need to lock, substitute a privacy set for the passage set. Bore holes are necessary for doors that have latches. Alternatively, you can also use a double dummy set on each door if the doors have roller catches, flush bolts, or surface bolts to latch them shut.

Exterior French Doors

For exterior French/double doors with entry handlesets, we recommend ordering a dummy entry handleset set and a regular entry handleset to provide a locking mechanism between the two doors. If you prefer a detached deadbolt, we recommend ordering a single dummy interior set for the non-dominant door. For the main door, we recommend a full entry set to provide a locking mechanism between the two doors.

If you have additional inquiries, please contact us directly via the form on our CONTACT US page using the topic "General Inquiry".

Absolutely. And, we have Entry Handlesets, Entry Sets and Deadbolts for precisely this purpose

Yes, we can provide either keyed alike or keyed different options at no additional cost to you. Kindly specify your preference in the cart notes.

Iron is harder and stronger than bronze.

Ageless Iron privacy sets have an emergency release hole on the exterior rosette or plate. We include a special "key" which is inserted into this hole to unlock the privacy function.

Yes. This is called a split style and is considered a custom item. Custom orders may require a an extra business day to process and may be subject to additional charges. All custom orders must be ordered via phone with Ageless Iron Hardware or through your local showroom dealer.

While it is physically possible to install our hardware upside down, we highly advise against it for multiple reasons. If you have additional inquiries, please contact us directly via the form on our CONTACT US page using the topic "General Inquiry."

Technical Questions

Iron must be heated to a range of 2,060 – 2,200 °F (1,127 – 1,204 °C) to become molten (liquid).

No. Normal cast iron will rust if the surface is not protected. Ageless Iron is zinc plated for lasting corrosion protection. And we powder-coat every piece with a coating that has been tested to 12 months of Florida exposure (AAMA2603.02, 6.6.) and is both UV and salt resistant.

When ordering door hardware, it is essential to know what will work with your door. If you have a new door, you may need to create your own bore hole. If you are replacing the hardware on an existing door, be sure to measure to determine which backset size will work with your door. Additionally, you will want to measure the thickness of the door to make sure the hardware fits.

To determine the correct backset measurement for your door, you will need to measure the distance from the edge of the door to the center of your bore hole.

The distance from the inside edge to the outside edge of a door is the door thickness measurement. The industry standard for modern (post-1950) front doors is 1 3/4”. Many interior doors measure 1 3/8”thick. If your door is thicker than 1 3/4”, choose products from Grandeur Hardware, from which thick door kits are available

Handing of doors is critical when selecting Sets with Levers, Long Plates,or SplitDesign combinations. Handing for door sets is determined by standing on the OUTSIDE FACING THE DOOR.

While standing on the outside of the door, located the door hinge location.

If the hinge is on the left, the door is left hand.

If door hinge is on the right, the door is right hand.

California’s Proposition 65 requires businesses to disclose when their products contain potentially hazardous chemicals. Regal Brands/Ageless Iron is complying with the law and notifying users that our products contain trace amounts of some chemicals listed in Prop 65. The risk of exposure to these chemicals from our products is very low. However, we are complying with the law to protect our customers.

The following warning is included across our family of brands because our products contain brass, including trace amounts of lead, which are potentially hazardous:

WARNING: This product can expose you to chemicals, including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to